See more: Devcon Plastic Welder™
- Tough, structural adhesive with superior impact and peel resistance
- Requires minimal surface preparation
- Bonds dissimilar substrates as well as unprepared surfaces
- Functional cure in one hour
- Final bond resistant to weathering, humidity and wide variations of temperature
- 1:1 formula for easy dispensing
- Non-sagging formula
- Creamy consistency, good for filling gaps
- Pack of 1 TUBE
- Manufacturer part number: 14300
- UPC Code: 78143143007
- Peel strength tested according to ASTM D1876-61P; Resistance tested by immersion of bonded steel lap joints for 2 weeks in antifreeze, jet fuel, 10% and 50% sulfuric acid, and 10% and 20% potassium hydroxide, and by immersion for 2 months in gasoline at 72 °F; Shear strength tested according to ASTM D1002; Compression shear strength tested according to ASTM D3931; Impact resistance tested according to ASTM D950
- Adhesive Tensile Shear = 3,500 psi
- Applicable Materials = Aluminum; ABS; Ceramics; Composites; Concrete; Engineered Plastics; Fiberglass; Most Metals; PET; Plastic; Polycarbonate; Polyesters; PVC; SMC; Stainless Steel; Steel; Strenics; Wood
- Applications = Multi-Purpose
- Capacity Vol. [Nom] = 25 mL
- Chemical Compound = Methyl Methacrylate
- Color = Straw
- Fix Cure Time @ Temp. = 1 h @ 72 °F
- Full Cure Time @ Temp. = 4 h @ 75 °F
- Gap Fill [Nom] = 1/8 in
- Hardness [Nom] = 78 Shore D
- Packing Type = Dev-Tube™
- Physical Form = Paste
- Resistance = Weather; Gasoline; Motor Oil; Moisture; Jet Fuel; Hydrocarbon; Hydraulic Fluid
- Temp. Range [Max] = 250 °F
- Temp. Range [Min] = -40 °F
- Viscosity [Nom] = 50,000 cP
- Working Time [Max] = 6 min
- Working Time [Min] = 4 min
- Working Time [Nom] = 4-6 min
- Wt. = 0.17 lb
- This item is a non-stock item. Lead time may be upwards of 4 weeks.
