This version of the LM™30SS (Skid Steer) drill uses a CAT® 246D Skid Steer carrier to power and transport the drill components. A compact, mobile unit that ensures quick set up time and ease of moving from site to site. The rig utilizes a standard LM30 drill rig and is powered by the 54 kW, CAT C3.3B DIT (turbo) diesel engine. This drill uses the same lightweight control panel and hydraulic system is the same as that on modular LM30. The drill comes integrated with a positioned and a turntable which enables it to drill holes in all angles from vertically up to vertically down.

CAT 246D skid steer with 54 kW CAT C3.3B DIT (turbo) diesel engine
Direct drive feed frame with 40kN pullback and 1.1m standard feed stroke
BQ™ (HQ™ optional) rotation unit with chuck assembly
BQ™ (HQ™ optional) foot clamp; spring close and hydraulic open
Lightweight Control Panel with variable controls
Integrated water pump Integrated compact positioner with 360 degree turntable
Automatic fire suppression unit for CAT skid steer
Optional 500m (1,640 ft) wireline winch
CAT® is a registered trademark of Caterpillar® company.

PLEASE CONTACT ATLAS MINING AND MANUFACTURING FOR PRICING AND AVAILABILITY.

	Metric	U.S.
Vertical Depth Capacity (400FF)	250 m (NRQ)*	850 ft (NRQ)*
Drill Rod Size	AQ - HQ	AQ - HQ
* The figures in these tables are estimates which have been calculated using the applicable pullback capacity of the drill. Actual drilling results may vary and will depend on in-hole tools, subsurface and other environmental conditions, drilling techniques and equipment used.

	Metric	U.S.
Feed Stroke	1,100 mm	3.6 ft
Max. rated pushing force	40.4 kN @ 25 MPa	9,082 lbf @ 3,625 psi
Max. rated pulling force	38.8 kN @ 26 MPa	8,723 lbf @ 3,625 psi
Rated carriage speed	0.5 m/s per complete cycle	1.64 ft/s per complete cycle
Normal rod handling speed	Approximately 15 m/min.*	Approximately 50 ft/minute*
Note: Feed cylinder cushioned at both ends. Dual load holding valves.
*Actual rod handling speed may vary with working conditions

	Metric	U.S.
Standard unit CAT 246 D	CAT 3.3B DIT Turbo Diesel Engine
Power	54 kW	73 hp
Cat® is a registered trademark of Caterpillar® Company

	BQ™ Chuck	BQ™ Rod Holder	HQ™ Chuck	HQ™ Rod Holder
Maximum opening	60.0 mm (2.86 in) Diameter corresponding to the ID of the LTK60 guide bush	60.0 mm (2.86 in) Diameter corresponding to the ID of the LTK60 guide bush	97.0 mm (3.82 in) Diameter corresponding to the ID of the HQ™ guide bush	97.0 mm (3.82 in) Diameter corresponding to the ID of the HQ™ guide bush
Type	Closed hydraulically Opened mechanically Automatic synchronization with rod holder	Closed mechanically Opened hydraulically Automatic synchronization with chuck Manual overdrive	Closed hydraulically Opened mechanically Automatic synchronization with rod holder	Closed mechanically Opened hydraulically Automatic synchronization with chuck Manual overdrive
Jaws	3 with tungsten carbide inserts	2 with tungsten carbide inserts	3 with tungsten carbide inserts	2 with tungsten carbide inserts
Max. rated axial holding capacity	75.0 kN* (16,600 lbf*)	60.0 kN* (13,300 lbf*)	85.0 kN* (19,109 lbf*)	80.0 kN* (17,985 lbf*)
Max. rated static torsional holding capacity	520 N-m (383 lbf*)	1,670 N-m (1,230 lbf*)	Forward and reverse rotation 3900 N-m (2,870 lbf*)	Forward and reverse rotation 3,900 N-m (2,870 lbf*)
*At 7 MPa (1015 psi) with new jaws and rods

	Metric	U.S.
BQ™
Forward Rotation
Chuck Speed	2,300 RPM, continuously variable. speeds will vary with oil type and temperature are only approximate
Chuck torque output	140 N-m @ 1,500 RPM 390 N-M @ 500 RPM	103 lb-ft @ 1,500 RPM 287 lb-ft @ 500 RPM
Reverse Rotation
Chuck Speed	45 RPM, Fixed to help prevent rod thread damage
Chuck torque output	1230 N-m & 26 MPa with break-out device	910 ft-lb @ 3,770 psi with break-out device
HQ™
Forward Rotation
Chuck Speed	1,650 RPM, continuously variable. speeds will vary with oil type and temperature are only approximate
Chuck torque output	104 N-m @ 1,200 RPM 375 N-M @ 500 RPM	77 lb-ft @ 1,200 RPM 276 lb-ft @ 500 RPM
Reverse Rotation
Chuck Speed	60 RPM, Fixed to help prevent rod thread damage
Chuck torque output	1,825 N-m & 26 MPa with break-out device	1,350 ft-lb @ 3,770 psi with break-out device

High Flow XPS	Metric	U.S.
Max Pressure	28 MPa	4,060 psi
Max Flow	121 L/Min	32 gpm
Control System PLC

Variable speed hydraulically driven piston pump

Variable speed hydraulically driven c/w 500 m (1,640 ft) cable
Type	All hydraulic, with proportional spooling control power up, power down, hydraulically locked in neutral free. Wheel override, chain driven spooling device.
Line Pull
Bare Drum	11.77 kN	2649 lb
Full Drum	4.51 kN	1015 lb
Line Speed
Bare Drum	0 - 100 m/min	328 ft/min
Full Drum	0 - 254 m/min	833 ft/min
Drum Capacity
5 mm	500 m	1640 ft
6 mm	300 m	984 ft

Products

Boart Longyear LM 30SS

$ 0.00